Table of Contents
Advertisement
IRF1000 series
3.4 Warranty / repairs
During the device warranty period, any repairs must only be performed by the manufacturer or by
service personnel that has been authorised by the manufacturer.
3.5 Intended use
The device was developed especially for IT security in machines and plants and for secure remote
maintenance via the Internet.
The following application areas are realised with the industrial firewall:
Remote maintenance, NAT router, mobile radio router, machine firewall
The device is only to be assembled, installed and operated within the permissible specifications. Use in
non-specified environments is prohibited.
3.6 Improper use
Operation other than or beyond that described for the device shall be deemed improper use.
The device is not allowed to be used to control vehicles or for applications for which further approvals
beyond the manufacturer's declaration are necessary, e.g. applications with explosion hazard, medical
technology, shipping industry. The device must not be put into operation in the case of transport
damage or nonconformity with the specifications and, if necessary, must be taken out of operation in the
case of changing conditions.
In the case of improper use, ADS-TEC shall not accept responsibility or liability for injury or damage that
is directly or indirectly attributable to the handling of the device. Should the device have evident signs of
damages caused, e.g., by improper operation or storage conditions or due to improper use or handling,
it must be shut down immediately. Ensure that it is secured against being started up accidentally.
3.7 Safety instructions
ATTENTION
Damage due to electrostatic discharge!
Damage to the device can be caused by electrostatic discharge.
Always adhere to the relevant safety measures applicable when handling
•
components at risk of being damaged by electrostatic discharge (e.g. EN 61340-
5-1 / EN 61340-5-2).
•
All installation and service work performed on the device must be performed only
under safe, secure and de-energised conditions.
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
Instruction manual v1.3
12
Hide quick links:
Advertisement
Table of Contents
