Front Leds - ADS-tec IRF1000 Series Instruction Manual

IRF1000 series

6.1.1 Front LEDs

Power
Status
VPN
WWAN
LANx / WAN
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
Instruction manual v1.3
Signal Action
This device is not supplied with voltage.
Voltage was switched on, device booting.
LED flashes slowly (1 Hz).
Firmware is being updated.
LED flashes rapidly (5 Hz).
The device is ready for operation.
This device is not supplied with voltage.
Error during the boot-up process / recovery image
No VPN tunnel is active.
The tunnel activated via VPN key is active.
No mobile radio connection active.
Network search (1 Hz)
Login declined (2 Hz)
Firmware update of the radio module (5 Hz)
Logged in, offline
Logged in, standby (dial-on-demand)
Logged in, online
Link/activity
Speed (down: 100 Mbit/s; up: 10 Mbit/s)
21