IRF1000 series
8 Technical data
Operating system
Configuration protocol
Interfaces
External device
dimensions
Weight
Protection class
Over voltage category
Pollution degree
Altitude during operation
Power supply
Max. current
consumption
Ambient temperature
You can find further information about the device in the data sheet on our website:
http://www.ads-tec.de
© ads-tec Industrial IT GmbH • Heinrich-Hertz-Str.1 • 72622 Nürtingen • Germany
Instruction manual v1.3
IRF1000 series
Embedded LinuX
http, https
1 x WAN RJ45 (10/100 Mbit/s Autocrossover)
3 x LAN RJ45 (10/100 Mbit/s Autocrossover)
1 x digital input (electrically isolated)
1 x RS-485 for Modbus RTU (electrically isolated)
See dimensional drawings in chapter 5
Approx. 0.2 kg
IP30 (tested by ADS-TEC, not evaluated by UL)
I as per DIN EN 60664-1 (max. 1500 V)
2 as per IEC 61010-1
2000 m or less
Voltage: 24 VDC ± 20 %
Requirements on the power adapter:
Class PS2 acc. to IEC 62368-1
•
Limited Power Source (LPS) acc. to IEC 60950-1
•
Short-circuit current: < 8 A
•
For devices with UL-Certification: NEC Class 2
IRF1401: 0.5 A (≙ 12 W @ 24 V)
IRF1421: 0.8 A (≙ 19.2 W @ 24 V)
in operation
-30 ... +70°C
for storage
-40 ... +85°C
– or –
29