Wiring
• Check the device nameplate and process device tag to verify the approval rating.
• Use appropriate conduit seals to maintain IP or NEMA rating.
• Read Instructions specific to hazardous area (Page 20).
• Cable entry devices and closing elements of unused apertures must meet a temperature
5.1
5.2
Signal amplifier/power supply
SITRANS LC300 uses a switched power supply circuit that makes the most efficient use of the
available power present on the terminals. If the signal current is low (4 mA), the terminal
voltage will increase due to a voltage drop of other components in the loop, and if the signal
current is high (20 mA), the terminal voltage will decrease.
Loosen the lid clip and remove the enclosure cover to access connectors and electronics.
SITRANS LC300
Operating Instructions, 05/2021, A5E47904073-AA
WARNING
range from min. -40°C to 10 K above max. ambient temperature.
5
17