Table of Contents
Advertisement
Available languages
Available languages
4.5 HEAT EXCHANGERS WITH HERESITE® COATING
Turn off the entire unit, and secure the unit against unintentional power-on.
Comply with the site's specific safety instructions.
For maintenance on heat exchangers coated with HERESITE® treatment, please refer to SAKAPHEN® INSTRUCTION TECHNIQUE
INS/TEC/18 procedure attached below.
It is an obligation to respect the distance and water pressure indicated in previous chapter (3 bar maximum @ 400mm minimum) as well as the
spraying instructions described in chapter 4.2 LOW PRESSURE CLEANING – SLIGHTLY SOILED COILS.
Advertisement
Table of Contents
