Daikin RoCon UFH Installation And Operating Manual page 53

7.4.4 Setting the operating mode
The following operating modes are available:
• Day mode
(heating control without temperature reduction)
• Night mode
(heating control with permanent temperature reduction)
• Timer mode
(heating control with temperature reduction according to programmed switch-
ing times)
When the main screen is active, briefly press the Set key to change the operating
mode in the sequence Day, Night, Timer
Fig. 7-12: Navigation structure operating modes Day, Night, Timer
7.4.5 Setting time and date
1. Hold down the Set key until the "Hours" flash.
2. Keep pressing the Menu key until the required hour is displayed.
3. Press the Set key to save the value.
4. The "Minutes" start to flash.
5. Keep pressing the Menu key until the required minute is displayed.
6. Press the Set key to save the value.
7. The Seconds counter is reset to "0".
8. Set the date and the weekday in the same way as described above.
Operation
RoCon UFH
EN
51