Table of Contents
Advertisement
DR-1 Plastic Fluid Regulator - Introduction
INTRODUCTION
FEATURES
• Two independently controlled flow pressure
ranges.
• High flow range port for higher fluid deliveries.
• Low flow range for more precise control over
lower fluid deliveries.
• Interchangeable low flow ratios (1:1, 1:2, 1:3,
1:4, 1:6, 1:8, 1:10) for precise control.
• Plastic and coated wetted parts for
decreased color change time.
• Factory Mutual listed in conjunction with the
Aerobell 33
.
TM
5
SPECIFICATIONS
Environmental / Physical
Height w/fittings:
Diameter:
Mechanical
Air Pressures:
Fluid Input:
Fluid Output:
Pneumatic / Fluid Connections
Air Pilot:
Fluid In:
Tube,
Fluid Out:
Volume of Paint
Held Within
Regulator:
Model B: 3-inches
3-3/4-inches w/fittings
Variable by Control
(Manual or Automatic)
100 psi (6.8 bar max.)
(10 psi minimum above
output pressure)
Variable by Ratio
10-32 x 3/16-inch OD
Tube
(Low & High)
Model A: 1/4-inch OD
Tube
Model B: 1/4-inch OD
Nut & Ferrule
1/8-inch NPT
5 cc
LN-9228-00.3
Advertisement
Table of Contents
