Konica Minolta C350 Installation Manual page 7

IX.Adjusting Touch Panel
1. Turn on the Power Switch.
2. Call "Touch Panel Adjust" to the screen. (To dis-
play this function, press Stop → 0 → Stop → 3 on
the Control Panel.)
3. Using a ballpoint or similar device, lightly touch
the center of the + markers at four places on the
Touch Panel in order.
(Any specific marker can be the first one.)
4. Touch "END."
X.Loading the Test Copy Paper
1. Load the 1st drawer with A3 or Ledger paper.
2. Place the media types selection dial in the "Plain"
position.
XI.Setting Gradation Adjust
1. Check that A3 or Ledger paper is loaded in the
drawer.
2. Display the Tech. Rep. Mode screen.
(For details of how to display the Tech. Rep.
Mode screen, see the service manual.)
3. Select "Gradation Adjust."
4. Press the start key. A test pattern will then be pro-
duced on the A3 or Ledger paper.
5. Place the test pattern face down on the original
glass.
6. Place about ten sheets of A3 or Ledger paper on
the test pattern placed on the original glass.
Lower the original cover, if the machine is so
equipped.
7. Press the start key.
The machine will start reading the test pattern.
E-7