Chapter 1: About This Guide; Related Documents - Dell EMC PowerSwitch Z9432F-ON Installation Manual

Hide thumbs Also See for EMC PowerSwitch Z9432F-ON:

Table of Contents

This guide provides site preparation recommendations, step-by-step procedures for rack mounting and desk mounting your

switch, inserting modules, and connecting to a power source.

CAUTION:

To avoid electrostatic discharge (ESD) damage, wear grounding wrist straps when handling this

equipment.

NOTE:

Only trained and qualified personnel can install this equipment. Read this guide before you install and power up this

equipment. This equipment contains two power cables. Disconnect both power cables before servicing.

NOTE:

This equipment contains optical transceivers, which comply with the limits of Class 1 laser radiation.

Figure 1. Class 1 laser product tag

NOTE:

When no cable is connected, visible and invisible laser radiation may emit from the aperture of the optical

transceiver ports. Avoid exposure to laser radiation. Do not stare into open apertures.

Regulatory information

Marketing model Z9432F-ON is represented by the regulatory model E46W and the regulatory type E46W001.

BMC, ONIE, and DIAG OS default login

After you have installed and powered up your switch, you must enter the default username and password.

● Username (BMC): admin

● Username (ONIE and DIAG OS): root

● Password (uppercase): <SERVICE TAG>!

Topics:

•