System 6 Or Older Sports Consoles; Setting Channel And Pan; Operating Instructions; Sports Console - Colorado time systems MS-0149 Installation And User Manual

System 6 or older sports consoles

Setting Channel and PAN

If using the scoreboard wirelessly, you need a wireless adapter (WA-3 or WA-2)
connected to the sports console. The wireless adapter's channel must match the
scoreboard's wireless settings must match the transmitter that you are using. The
scoreboard's default factory settings used by the WA-2 are Channel 6 / PAN 0.

Operating Instructions

Operating Instructions

Sports console

Cabled connection:
Sports consoles can be connected by cables to the scoreboard.
Scoreboard cables must be supported a minimum of every 6 feet when not in conduit.
When conduit is used, the conduit must be secured every 3 feet at minimum.
Scoreboard cables must not be spliced in either indoor or outdoor applications. If using
wired data make sure there are no sharp bends in the cable. A bend in RS-232 cables
must have a minimum bend radius of 1.0".
Use a data cable (R-xxDC) to connect your sports timer to the round quarter-inch
RS-232 jack on the bottom of the scoreboard.
www.coloradotime.com
5