Useful Remote Control Features - Apex Digital AT3208S Instruction Manual

Instruction Manual
FUNCTIONS & FEATURES (continued)

Useful Remote Control Features

DISPLAY
This key allows you to display the current information of the TV screen on the upper right hand corner of the
screen. (channel, antenna mode, time, video, etc.)
TIMER
This key allows you to directly access the Timer menu. For an explanation of this menu features, please see
page 10.
SCAN
Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the Scan,
pressing any key can interrupt scanning. Please note that Scan will only work in Antenna mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture
modes, press the PICTURE key, and you can choose among User, Normal, Movie, and Sports.
SOUND
Press the SOUND key repeatedly, and you can choose among User, Normal, Speech, Movie, and Music.
STEREO
In the Video mode, press the STEREO key to set Stereo to one of the R/L/On modes.
RECALL
This key will allow you to return to the last channel you were viewing. Pressing it again will return you to the
channel you just left.
CC
Pressing the CC key will activate the currently selected Closed Captions or Text under the System Menu.
Pressing it again will turn off the Closed Captions or Text.
VIDEO
This key allows you to toggle between antenna and different video modes.
Child Lock
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F key, and
then press MUTE. You should see a key symbol appear on the screen. This will lock out all remote functions
(except for Standby). To unlock the TV, press and hold the F key and press MUTE. This will unlock the TV.
Please note that the only way to activate or deactivate the Child Lock feature is via remote control - please
insure that it is stored securely.
SLEEP
Press this key repeatedly to switch the TV to one of the following modes: 180
45 30 15
Sleep time is up. The TV will display a message one minute before the Sleep timer runs out.
0-9
Press the 0-9 keys to enter channel numbers directly (2-69 in the Air mode or 1-125 in the Cable mode).
1.To choose a one-digit channel number, press the corresponding Number key directly to switch to the
desired channel number in about 3 seconds.
2.To choose a two-digit channel number, enter a first-digit and then a second digit within 3 seconds.
3.To choose a three-digit channel number, enter a first-digit, second-digit and third-digit respectively in the
way mentioned above.
- -(Unit: Minute). The TV will automatically enter the Standby mode when the preset
12
150 120 90 60