Useful Remote Control Features - Apex Digital AT2408 Instruction Manual

Instruction Manual
F UN C T I ON S & F E A T U R E S

Useful Remote Control Features

D I S P L A Y
This key allows you to display the current information of the TV screen on the upper right hand
corner of the screen. (channel, antenna mode, time, video, etc.)
T I M E R
This key allows you to directly access the Timer menu. For an explanation of this menu features,
please see page 10.
S C A N
Press the SCAN key twice, and the TV will begin to scan through all active channels. To stop the
Scan, pressing any key can interrupt scanning. Please note that Scan will only work in Antenna
mode.
PICTURE
Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate
these picture modes, press the PICTURE key, and you can choose among Memory, Theater and
Normal.
R E C A L L
This key will allow you to return to the last channel you were viewing. Pressing it again will
return you to the channel you just left.
C C
Pressing the CC key will activate the currently selected Closed Captions or Text under the System
Menu. Pressing it again will turn off the Closed Captions.
V ID EO
This key allows you to toggle between antenna and different video modes.
Child Lock
The Child Lock feature prevents unauthorized viewing of the TV. To activate, press and hold the F
key, and then press MUTE. You should see a key symbol appear on the screen. This will lock out all
remote functions (except for Standby). To unlock the TV, press and hold the F key and press MUTE.
This will unlock the TV. Please note that the only way to activate or deactivate the Child Lock feature
is via remote control - please insure that it is stored securely.
0 - 9 / 1 0 0 +
Press the 0-9 and 100+ keys to enter channel numbers directly (2-69 in the Air mode or 1-125
in the Cable mode).
1.To choose a one-digit channel number, press the 0 key, then press another Channel Number key
to select a desired number.
2.To choose a two-digit channel number, enter a first-digit and then a second digit.
3.To choose a three-digit channel number, press the 100+ key so that 1- - appears on the screen,
then enter the next digit one <None>and two.
12