nilan CTS 602 User Manual page 22

CO
2
In the "CO " menu it is possible to regulate the ventilation step in accordance with the CO
2
CO -sensors are accessories and these sensors have to be installed in order for the unit to regu-
2
late in accordance with the CO
" " indicates that the menu point flashes and can be set to another value.
ENTER FLOW
CO
2
May be subject to change
-level.
2
On the CTS 602 control panel, press:
- ESC to return to the previous menu
- qp to scroll upwards or downwards through the menus or to
adjust the setting of an activated menu option
- ENTER to activate a menu option
- ENTER to confirm a new menu option setting
- OFF to switch off the controls
- ON to switch on the controls
ENTER
HIGH 3
ENTER
HIGH
800ppm
ENTER
NORMAL
600ppm
Figure 16: The "CO
Option of choosing high
ventilation step at higt
humidity.
The value can be set to: OFF
and 2, 3, 4 .
ENTER
FLOW
"3"
HIGH
ENTER
HIGH
"800"ppm
ENTER
NORMAL
"600"ppm
Limit of how low the CO
concentration may be before
normal ventilation step is
activated.
" menu
2
level.
2
Limit of how high
the CO
2
concentration may
rise before high
ventilation step is
activated.
2
page 22 af 28