nilan CTS 602 User Manual page 18

Heating surface
The menu HEATING SURFACE is only accessible when the system has a heating surface in-
stalled and when the control has been set up to a heating surface in the SERVICE MENU.
" " indicates that the menu point flashes and can be set to another value.
HEATING
SURFACE
May be subject to change
On the CTS 602 control panel, press:
- ESC to return to the previous menu
- qp to scroll upwards or downwards through the menus or to
adjust the setting of an activated menu option
- ENTER to activate a menu option
- ENTER to confirm a new menu option setting
- OFF to switch off the controls
- ON to switch on the controls
ENTER
SELECT
ON
If you wish to disconnect the
heating surface this position should
be chosen.
The frost-protection is still active
and T7 is the active temperature
sensor for the inlet air.
Figure 12: The "Heating surface" menu
When a heating surface is
installed T2 is replaced
with T7, which is the
sensor placed in the inlet
at the heating surface.
ENTER
SELECT
"ON"
SELECT
"OFF"
ENTER
ENTER
page 18 af 28