VIBIA Jazz Assembly Instructions

CAUTION: TO AVOID POSSIBLE ELECTRICAL SHOCK, MAKE CERTAIN ELECTRICITY IS SHUT OFF AT MAIN PANEL BEFORE WIRING
All wiring must be in accordance with national and local electrical codes. If you are not familiar with wiring, you should use a qualified electrician.
1
Lamp structure
2
Counterweight
1330. Net Weight 15 Kg
Caution
Before assembling and installing this product, carefully read the following:
-Never use a bulb with a wattage exceeeding the recommended one. Always use a bulb with the recommended wattage or lower.
-If the steel cable or the power cord of this lamp is damaged, it must be replaced only by the manufacturer or their technical service or by a person capacitated to this effect
to avoid any risk.
-This lamp is for indoor use only, excluding bathrooms or any type of humid surface.
Jazz
Design by Diego Fortunato
ASSEMBLY INSTRUCTIONS

SUPPLIED MATERIAL

TECHNICAL SPECIFICATIONS

1 x PL-T GX24q-4 Triple Tube 42W
1330
1 un.
1 un.
1. 2.
Class I. Product with an additional protection cable (grounds).
Product protected against solid object as big as or bigger than 12
mm. No protection against water.
Product that CAN be in contact with normally-flammable materials
(wood or others).