Gardeo GTHT26RH-AVW Original Instructions Manual page 32

This quick guide is for experienced users of this product only, Please read the details in
manual for first time using, The following guides are with explanation pictures at the
1. Add fuel: always run this product with fuel, which is mixed with 2-stroke oil with
2. Set ignition switch to the "I" position (ON position). (Fig.2)
3. Press priming bulb several times until fuel is visible and flows freely in the clear fuel tank return line. (Fig.3)
4. Set the choke lever to the "Cold start"(closed) position.(Fig.5)
5. Pull recoil starter briskly, when you hear the engine seems to start, return choke lever to "I" position (ON position),
then pull recoil
starter briskly again until the engine runs. (Fig.6 Fig.7)
6. After starting engine, press throttle trigger to release throttle lock, then allow engine run several minutes to warm up.
(Fig.8)
7. After engine warm-up, press throttle trigger gradually to get operating speed.
8. To stop the product: release throttle trigger first, then set ignition switch to the "Stop" position, In case of emergency,
directly set
ignition switch to the "Stop" position.(Fig.9)
Quick User Guide
Pertol hedge trimmer
backside of this card:
32
ratio 30:1. (Fig.1)
GARDEO PRO
81, rue de gozée
6110 Montigny-le-Tilleul
Tél : 0032 (0) 71 29 70 70
Fax : 0032 (0) 71 29 86
Made in China
Belgique
2019