Safety - Kessel Comfort PLUS SD Installation And Operating Instructions Manual

2

Safety

2.1 Personnel - qualification
The relevant operational safety regulations and the hazardous substances ordinance or national equivalents apply for the
operation of the system.
The operator of the system must:
prepare a risk assessment
identify and demarcate corresponding hazard zones
carry out safety training
secure the system against unauthorised use.
Person
1)
Operating company
Technical expert, (familiar with,
understands operating instructions)
Electrical specialist VDE 0105 (per regulations
for electrical safety, or per national equivalents)
1) Operation and assembly work may only be carried out by persons who are 18 years of age.
2.2 General safety notes
NOTICE
Disconnect system from energy sources!
Ensure that the electrical components are disconnected from the electrical power supply during the work.
WARNING
Live parts! The housing of the control unit may only be opened by a qualified electrically skilled person!
Work on the control unit is restricted to:
switching on the contactor and adjusting the motor protection switch
replacing the batteries,
connection in accordance with the installation instructions and connection diagram.
All work extending beyond this may only be carried out by the KESSEL customer service or a service partner of
KESSEL AG
WARNING
Live parts
Heed the following points when working on electrical cables and connections.
The national regulations concerning electrical safety apply to all connections and installation work.
The system must be supplied through a residual current protection device (RCD) with residual current of not
more than 30mA.
Operating and maintenance instructions must be kept available at the product.
26 / 140
Approved activities on KESSEL systems
Visual inspec-
tion, inspection
Installation and operating instructions
Functional check, config-
uration of the control unit
Work on electri-
cal installation
010-990