Recommended Tools; Sensor Assembly Set Up - SwitchDoc Labs WeatherRack2 Installation Manual

QTY Item
4 Tapping screws
Figure 1

Recommended Tools

Precision screwdriver (for small Phillips screws)
Compass or GPS (for wind direction calibration)
Adjustable Wrench
Hammer and nail for hanging remote F016TH thermo-hygrometer transmitter.

Sensor Assembly Set Up

The following illustration shows FT-020T Sensor Array
Figure 2
3.3.1 Insert batteries into the transmitter. Locate the battery door on the transmitter, push and open the
battery compartment, as show in Figure 3.
9 Page
Version 1.3 October 2020
Image