Towing; Maintenance - Oregon OR25TBS-1 Original Instruction Manual

Towing

CAUTION: See safety information related to
towing safety on page 6 of this manual.
This log splitter is equipped with pneumatic tires, a class
1 coupler (2 in . diameter ball required) and safety chains .
Before towing, the safety chains must be secured to the
hitch or bumper of the vehicle . Local regulations should
be checked regarding licensing, lights, towing, etc . Turn
fuel shut off valve on the engine to the "OFF" position
prior to towing . Failure to do so may result in flooding
the engine . Do not exceed 45 mph when towing this log
splitter . See also Towing Safety on page 6 of this manual .

Maintenance

CAUTION: See safety information related to general
repair on page 9 and hydraulic safety on page 10.
1 . Consult the operating and maintenance instructions
of the engine manufacturer for engine care and
maintenance .
2 . Always check the oil level of the hydraulic reservoir
before operation . Operating the log splitter without an
adequate oil supply will cause severe damage to the
pump .
3 . Change the hydraulic oil filter after the first 25 hours
of operation . Thereafter, change the oil filter every 100
hours or seasonally, whichever comes first . The fIlter kit
part number is 622528 .
4 . To drain the hydraulic oil, remove the drain screw on the
bottom of the tank .
5 . If the wedge becomes dull or nicked, it can be removed
and sharpened .
6 . Clean the breather cap after 25 hours of operation . Clean
it more often when operated in dusty conditions .
7 . See also General Repair and Hydraulic Safety on page 9
of this manual .
8 . All replacement parts must meet manufacturer's
specifications .
Operating Instructions
29