Oregon OR25TBS-1 Original Instruction Manual page 17

Step 2:
2a: Locate the tongue assembly and rotate the jack into the down position .
2b: Remove the hold down bolt that secures the tank to the base of the pallet .
2c: Position the tongue so that the mounting holes align with the holes in the tanks tongue mount .
2d: Insert the two M12 x 110mm bolts with a flat washer under the head of the bolt .
2e: Install a flat washer, lock washer, nut on each bolt and tighten .
7
Item Description
1 Tongue Assembly
2 Tank Assembly
3 M12 x 110 Bolt
4 Flat Washer
5 Lock Washer
6 M12 Nut
7 Ground Stand / Jack Stand
1 2 3
Quantity
1
1
2
4
2
2
1
Assembly Instructions
4 5 6
17