Oregon OR25TBS-1 Original Instruction Manual page 23

Step 8:
8a: Locate log catcher accessory box .
8b: Remove the contents and inspect for damage . Note: If any part is damaged, contact your dealer or delivering carrier .
8c: Locate the (2) M12 x 35mm bolts, (2) M12 flat washers, and (2) M12 lock washers
8d: Align holes in log catcher with holes in the beam .
8e: Attach log catcher with provided hardware and tighten .
Item Description
1
2
1
3
4
3 4 2
Assembly Instructions
Quantity
Log Catcher
M12 x 35 Bolt
12mm Washer
M12 Lock Washer
1
2
2
2
23