Starting And Stopping; To Start Engine; To Stop Engine - Briggs & Stratton 91200, 92200, 94200 Operating & Maintenance Instructions

STARTING AND STOPPING

REWIND (MANUAL) STARTER

TO START ENGINE

OIL LEVEL
[1] Check oil level (see p. 8).
ON
OFF
Stop Switch
[4] Move stop switch (if
equipped) to ON.

TO STOP ENGINE

CAUTION: Do not stop engine by moving choke
control to CHOKE. Backfire, fire or engine damage
could occur.
Throttle
[1] Move throttle control to SLOW, then to STOP (if equipped).
Throttle
[2] Move throttle (if equipped) to FAST. Operate engine with throttle in FAST.
[3] Move choke control lever to CHOKE.
WARNING
[5] Grasp rope handle. Pull
slowly until resistance is
felt, then pull rapidly to
start engine and avoid
kickback.
Throttle
10
Throttle
Choke
[6] Let engine warm up.
Choke Equipped: Move
choke control lever
toward RUN a short dis-
tance at a time over sev-
eral seconds in warm
weather or minutes in cold
weather. Let engine run
smoothly before each
change. Operate with
choke in RUN.
OFF
ON
Stop Switch
[2] Push stop switch (if
equipped) to OFF.