Block Diagramm Of Operation; Operational Flow Chart - PeakTech 1006 Operation Manual

2.2 Block Diagram of Operation
MODE /
FUNC
All main operations are obtained via the eight control keys. Plus, any of the keys that have two operations (i. e.
Mode/Func, Freq/Per., Range/Attn.) stated, may access the second operation by toggling the respective key.
Secondly, all "Sub Func" operations are entered by continuously pressing "Sub Func" key. Once the correct option
is displayed, use the scroll keys to set operation.
3.

Operational Flow Chart

The following flow chart gives the flow of operations in the function generator. Upon powering up or if the "Reset"
key is pushed, the unit defaults to a continuous sine wave, with all sub function operations disengaged.
FREQ / RANGE /
PER ATTN
Frequency
Ranges
Cont, Trig
Gate, Clock
PeakTech
Function Generators
SELF TEST
SUB
FUNC
Attenuation
Sine, Square
Triangle, DC
- 19 -
EXT. RESET
FREQ
Sym, VCG, Sweep
DC offset, TTL Invert