Snapper 7800428 Parts Manual page 9

Engine, Cutting Deck & Blade
Item Part No
-- 100602-0155-B8
-- 121Q72-0110-F1 1
-- 126L02-4113-F1
-- 126T02-0267-B1 1
-- 128L02-0114-F1
-- 12S502-0112-B1 1
-- 12S507-0115-B1 1
-- 12S602-0110-F1 1
-- 12S902-0126-B1 1
-- 12S907-0127-B1 1
1 7500081
1 7400029
1 7500549
2 7091601
3 7090731
4 7046780
5 7011791
6 7091508
7 7090324
8 7074568
9 7015780
10 7090201
11 7091214
12 7015626
13 7101414
14 7012063
15 7090167
16 7026691
17 7026407
18 7044770
Footnotes:
NOTE: * Purchase engine parts from engine manufacturer dealer.
21"STEEL DECK WALK BEHIND MOWERS
SERIES 20
Qty Description
1 * ENGINE, B&S DOV 700 Series used on RP217020BDV
* ENGINE, B&S 875 Professional Series, California Compliant used on NP2187520
1 * ENGINE, B&S 675 Series used on N2167520B & NP2167520B
* ENGINE, B&S 675 Series used on 2167520B & P2167520B
1 * ENGINE, B&S 700 Series, California Compliant used on N217020B & NP217020B
* ENGINE, B&S 875 Series, Intek used on RP2187520BV, P2187520BV & RP2187520BV2N1
* ENGINE, B&S 875 Series, Intek used on P2187520BVE & RP2187520BVE
* ENGINE. B&S 875 Series, Snapper, XIC, F1 used on NP2187520BV
* ENGINE, B&S 875 Series, W14 used on RP2187520 & P2187520
* ENGINE, B&S 875 Series, W14, ES used on RP2187520E & P2187520E
1 WELDMENT, Deck, 21" Non-Adjust Air (red, w/o decals) used on "R" (recycling) models
1 WELDMENT, Deck, 21" Push, HV, Core Model (red, w/o decals) used on 2167520B &
N2167520B (push) models
1 WELDMENT, Deck, Part Sales, Hi-Vac, ES (red, w/decals) used on self-propelled (non-
recycling) models
3 NUT, 5/16-18 Hex Flange Lock, GR 5 or 7091070
3 BOLT, 5/16-18 x 1/2", Short Neck Carriage, GR 5
2 PLUG, Hole, Polyethylene
1 RETAINER, 5/16" Bolt
1 BOLT, 5/16-18 x 3/4" Short Neck Carriage GR 5 or 7090001
3 SCREW, 3/8-16 x 1" Self-Tapping engine mount bolts
1 COVER, Belt
1 PULLEY, Engine (25mm I. D. x 2-1/8" O.D.)
1 SET SCREW, 5/16-18 x 5/16" Hex Socket or 7092086 (SET SCREW, 5/16-18 x 1/2" Hex
Recess)
1 KEY, Woodruff #HP-506 Hi-Pro
1 HUB, Blade Drive, 25 mm I.D.
1 HUB, Blade, 21" WBM, RD, 2 Position
2 WASHER, Cone 3/8"
1 SCREW, 3/8-24 x 2" Hex Head Cap, GR 5
1 BLADE, 21" Standard Lift
1 BLADE, 21" Ninja (Quad Edge) Used on Recycling Models
3 SPACER, Blade Hub Used on RP2187520BVE & RP2187520E
9
Manual No. 7006477