Table of Contents
Advertisement
EN
METPOINT
UD01
®
Menu 17 – Maximum value display
Simultaneously press >>▲<< and >>▼<< to confirm menu option "HIPr".
The highest value measuring during the current measuring series is
displayed.
Reset maximum value: Simultaneously press >>▲<< and >>▼<< within 1
second after confirmation of the menu option.
The maximum value is automatically reset when the device is de-energized.
Menu 18 – Minimum value display
Simultaneously press >>▲<< and >>▼<< to confirm menu option "LoPr".
The lowest value measuring during the current measuring series is
displayed.
Reset minimum value: Simultaneously press >>▲<< and >>▼<< within 1
second after confirmation of the menu option.
The minimum value is automatically reset when the device is de-energized.
Menu 19 – Measured value update (display)
Simultaneously press >>▲<< and >>▼<< to confirm menu option "dLdS".
Press >>▲<< and/or >>▼<< to set the time interval for the update of the
display and confirm by simultaneously pressing the two buttons.
Value range: 0 ... 10 s
Installation and operating manual
13
Advertisement
Table of Contents
