To Remove/Replace Shade; To Remove/Replace Shield Holding Arms - Arai Helmet RAM-X Operation Instructions Manual

①
①
① ②
③
② ③
② ③
④

TO REMOVE/REPLACE SHADE

To remove shade for cleaning or replacement, first lower the shade.
Push the release lever on the pivot cover down against the sheild ① and
slide the pivot cover up to remove it ②. Repeat for the other side, and
remove the shade ③.
To replace shade, place it on the pivot in the lower position ①. Put the pivot
cover into 3 bosses ②, and slide it down until it is locked in place ③. Repeat
for the other side.

TO REMOVE/REPLACE SHIELD HOLDING ARMS

To remove holding arms, remove shield as per the previous instructions.
Hold the shield/holder as illustrated ①. Lift the curled end of the lower
bracket out of the pocket as illustrated ②.
Hold shield and slide the arm/holder up ③. Rotate the top of the arm away
from the shield and slide the lower bracket out of the track in the shield as
illustrated ④.
7