To Remove/Replace Chinstrap Covers - Arai Helmet RAM-X Operation Instructions Manual

Table of Contents

Advertisement

TO REMOVE/REPLACE CHINSTRAP COVERS

The chinstrap cover is secured to its base plate over the chinstrap anchor
by the tab. Push tab upward to release it from the base plate. Slide the
cover off the strap.
Left chinstrap cover (D-ring side)
Note the right and left, inside and outside of the chinstrap covers for
replacement.
Right chinstrap cover (long side)
To wash the chinstrap covers, put them into lukewarm water with small
amount of laundry soap or your own shampoo and wash gently by hand.
Rinse well with fresh water and wipe off with a soft cloth. Dry them in the
shade at ambient temperature.
10

Advertisement

Table of Contents
loading

Table of Contents