To Operate Top Vents; To Remove/Replace Shield - Arai Helmet RAM-X Operation Instructions Manual

OPEN CLOSE OPEN
OPEN CLOSE
OPEN

TO OPERATE TOP VENTS

Simply push the switches/levers on each vent to open/close the vents.
CLOSE
CLOSE

TO REMOVE/REPLACE SHIELD

It is recommended to do one side at a time until you become familiar with
the removal/installation process.
To remove, place shield in the fully open position. Once fully open, black
levers appear from under the shield pivot/holder arms. Slide the levers
forward in the direction of the arrow until the pivot/holder releases from the
base. Once released, lift the pivot/holder off the base.
NOTE:
The shield cannot be removed from any other position as the locking
system will be engaged.
5