Arai Helmet RAM-X Operation Instructions Manual page 6

4
To lower shade, first, unlock the shade by pulling both ends forward, and push
the shade down.
WARNING:
Before lowering the shade, be sure to unlock the shade. The shade can only be
lowered when the lock system is released.
There is a stop midway in the travel to allow for use to help reduce the glare of lights
that cannot be shaded when the shade is in the fully up position (i.e. morning or
evening sun).
WARNING:
The shade is not fully locked when it is in the midway position. Therefore, it may
drop or may be raised unexpectedly from wind pressure, vibration or even normal
head movement. Be aware of this and ride carefully.
WARNING:
Raise the shade of the Pro Shade System for riding at night, through a tunnel, or
any conditions that might cause poor visibility.
Do not use sunglasses with the shade of the Pro Shade System in the lower
position, as this will dangerously darken your view.
Use only warm water and a micro-fiber cloth to clean the shield and shade. Never
use petrol, thinner, benzene or any other solvents.
Scratched or damaged shades/shields of the Pro Shade System should be
replaced with new ones.