Front And Rear Panel Components - AMX NXC-ME260 Hardware Reference Manual

NXC-ME260/64 Specifications (Cont.)
Other AMX Equipment:

Front and rear panel components

FIG. 1 shows the front and rear panel components of the NXC-ME260/64.
Front
Rear
Ethernet 10/100
connector
NXC-ME260
Master-Ethernet
12 VDC
power connector
FIG. 1
Front and rear panel components (NXC-ME260/64 card shown installed within an NXS-MHS)
NXC-ME260/64 Hardware Reference Guide
• AC-RK Accessory Rack Kit (FG515)
• NXF CardFrame (FG2001)
• NXI Integrated Controller (FG2101)
• NXS-MHS Module (FG2009)
• Upgrade Compact Flash (factory programmed with firmware):
NXA-CFM64M - 64 MB compact flash card (FG2116-01)
NXA-CFM128M - 128 MB compact flash card (FG2116-02)
NXA-CFM256M - 256 MB compact flash card (FG2116-03)
NXA-CFM512M - 512 MB compact flash card (FG2116-04)
NXA-CFM1G - 1 GB compact flash card (FG2116-05)
Input LED (yellow)
Output LED (red)
Status LED (green)
PROGRAM
/64
ETHERNET
SPEED
12VDC
PWR
AXlink
STATUS OUTPUT INPUT
Program port (RS232)
Ethernet 10/100 LEDs
10/100
FD
PROGRAM ICSNet ICSHub
Program port connector (grey)
AXlink connector
AXlink status LED (green)
Expansion Out connector
Introduction
ICSNet connectors/LEDs
ICSHub IN/OUT
connectors/LEDs
IN
OUT
3