Product Information; Front And Rear Panel Components - AMX NetLinx Master-Ethernet Card/Module NXC-ME260 Instruction Manual

Product Information

The NXC-ME260 (FG2010-60) is a Master-Ethernet Card for use within NetLinx systems. This
card provides a 10/100 Base-T Ethernet connection and an RJ-11 SPE (Server Port Expander)
connector for use with an AXB-SPE (Server Port Expander). The NXC-ME260 is the only Master
card you will need, as it incorporates the functionality of all previous NetLinx Master Cards
(NXC-M, NXC-ME, and NXC-MPE).
Beyond replacing the previous set of NetLinx Master Cards, the NXC-ME260 represents a
high-performance NetLinx Master Controller. With double the Flash memory (16 MB) and a more
powerful processor (Coldfire
The NXC-ME260 can be loaded in the Master card slot of an NXF NetLinx Cardframe, in an NXI
Integrated Controller, or within an NXS-MHS Master/Hub Module.

Front and rear panel components

FIG. 1 shows the front and rear panel components of the NXC-ME260.
Front
Rear
Ethernet 10/100
connector
NXC-ME260
Master-Ethernet
12 VDC
power connector
FIG. 1 Front and rear panel components (NXC-ME260 card shown installed within an NXS-MHS)
NXC-ME260 NetLinx Master-Ethernet Card/Module
®
5407), the ME260 is faster than previous NetLinx Masters.
Input LED (yellow)
Output LED (red)
Status LED (green)
PROGRAM
ETHERNET
SPEED
12VDC
PWR AXlink
STATUS OUTPUT
Program port (RS232)
Ethernet 10/100 LEDs
10/100
FD
ICSNet
PROGRAM ICSHub
Program port connector (grey)
AXLink connector
AXLink status LED (green)
Expansion Out connector
Product Information
INPUT
ICSNet connectors/LEDs
ICSHub IN/OUT
connectors/LEDs
IN
OUT
1