Advertisement
OWNERS MANUAL
Elevate
Shower Bases
™
A8014T RHO / A8014T LHO/ A8016T-CO
A8017T-CO / A8015T-CO
INSTALLATION INSTRUCTIONS
Thank you for selecting American Standard – the benchmark of fine quality for over 150 years. To ensure this
product is installed properly, please read these instructions carefully before you begin. Certain installations may
require professional help.
INSTALLATION PREPARATION
• Please unpack carefully and identify all parts needed for installation by using the Box Contents as a reference.
Inspect the product and report any damages or missing parts immediately to customer care by calling 800-
442-1902. Follow the prompts for consumer/bathing.
NOTE: Take extra care in handling edges and surfaces of bases. Use only non-abrasive cloths to
avoid scratching.
• The Elevate Base dimensions are nominal and meant for a standard alcove. Please measure your alcove to
determine if the Elevate Base will work in your alcove prior to installation.
A8014T RHO/LHO
60 X 30
A8016T-CO.011
36 X 36 Corner
• Ensure adequate wall support is provided to area where base is to be installed.
• Wear protective equipment during installation to avoid injury.
• Please keep these instructions for after care and customer service details.
BOX CONTENTS
60 X 30 RHO/LHO A8014T
36 X 36 Corner A8016T-CO
38 X 38 Neo Angle A8017T-CO
48 X 30 Alcove A8015T-CO
Trench/Drain Plate
A8017T-CO.011
A8015T-CO
48 X 30 Alcove
10 Clips
6 Clips
6 Clips
8 Clips
38 X 38 Corner
Advertisement
