AMX NXD-CV7 Operation/Reference Manual page 105

The only way to modify a panel's time, without altering the Master, is to use NetLinx
Code.
The elements of the Time & Date Setup page are described in the table below:
Time & Date Setup Page Elements
Back:
Connection Status icon:
Time Date Refresh/Set:
Time Display fields:
Date Display fields:
Set Date/Time:
Modero touch panels do not have an on-board clock. This page both receives and
sets the time/date of the NetLinx Master.
7" Modero Widescreen Touch Panels
Returns you to the previously active touch panel page without saving changes
(to save changes, use the Set Time button).
This visual display of the connection status allows the user to have a current
visual update of the panel's connection status regardless of what page is
currently active.
• A Lock only appears on the icon if the panel has established a connection
with a currently secured target Master (requiring a username and password).
This section provides you with two options:
• The Get Time/Date button retrieves the Time and Date information from the
Master.
• The Set Time/Date button sets the Master to retain and save any
time/date modifications made on the Time and Date Setup page.
• These fields display the time in three formats: STANDARD, STANDARD
AM/PM, and 24 HOUR.
• These fields display the calendar date information in several different formats.
This section provides a user with both UP/DN arrow buttons to alter the
Master's calendar date and time. The blue circle indicates which field is cur-
rently selected.
• Select the Year field and use the UP/DN buttons to alter the year value
(range = 2000 - 2037).
• Select the Month field and use the UP/DN buttons to alter the month value
(range = 1 - 12).
• Select the Day field and use the UP/DN buttons to alter the day value
(range = 1 - 31).
• Select the Hour field and use the UP/DN buttons to alter the hour value
(24-hour military).
• Select the Minute field and use the UP/DN buttons to alter the minute value
(range = 0 - 59).
• Select the Second field and use the UP/DN buttons to alter the second value
(range = 0 - 59).
Firmware Pages and Descriptions
95