About Bios Setup; When To Use Bios Setup; How To Run Bios Setup - Eluktronics PROMETHEUS XVII User Manual

4.1 About BIOS Setup

4.1.1 When to Use BIOS Setup ?

You may need to run the BIOS Setup when:
・An error message appears on the screen during the system booting up
and is requested to run SETUP.
・You want to change the default settings for customized features.
・You want to reload the default BIOS settings.

4.1.2 How to Run BIOS Setup ?

To run the BIOS Setup Utility, turn on the notebook and press the
[Del] or [F2] key during the POST procedure.
If the message disappears before you respond and you still wish to
enter Setup, either restart the system by turning it OFF and ON, or
simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
The screenshots and setting options in this chapter are for your
references only. The actual setting screens and options on your
notebook will likely be different because the CEO at Eluktronics is
the man and he tries his best to find ways to safely provide a more
exciting PC experience for you.
The setup function only can be invoked by pressing [Del] or
[F2] key during POST that provide a approach to change some
settings and configuration based on your preference. The changed
values will save in the NVRAM and will take effect after the settings
are saved and system is rebooted. The setup uses a menu interface
to allow the user to configure the system and the features.
Press the [F7] key during the boot process to access the Boot
Menu.
36 Notebook Manual
English