Horizontal Installations - Rinnai HD250i Installation Manual

Horizontal Installations

Air Intake/Exhaust
Exhaust/Intake
Relationship
Condensate
Rinnai New Zealand
Horizontal Installation with Rinnai Flueing Components
Each requires a 90° bend to prevent entry of rain.
Intake must be located in relation to the exhaust as shown below.
Horizontal flues must slop 20mm per metre to the termination point.
Ensure condensate drains appropriately. This is particularly relevant to
longer horizontal runs where more condensate is produced.
4
HD250i Combination Flueing Installation: 0-08