Tactacam SPOTTER LR Instruction Manual page 6

CONNECTING YOUR TACTACAM
OPERATING THE SPOTTER LR
1. Push the Power button. You will see a
green light around the Power button. (The
green LED light will be blink when the
Tactacam is recording.)
2. Screen Orientation
With the camera ON push the menu button.
You will see the camera's quick menu.
Select Screen Flip to properly orientate your
display. (Push OK (Power button) to make a
selection) and Exit.
3. To start recording, the camera should be
powered ON, push the power button again,
you will see the Green light start to blink.
There is also a RED visual on the top right of
the Spotter LR screen. RED record icon will
be blinking
NOTE: If light does not begin to flash, make
sure your SD Card is installed, formatted,
and not filled with videos.
4. Pause your recording by pushing the
Power button, you will see the blinking Green
light change to a solid green light around the
power button.
5. To power your camera off completely,
push and hold the Rec/Power button
for 5 seconds.
WWW.TACTACAM.COM