Frequently Asked Questions - Tactacam SPOTTER LR Instruction Manual

GETTING TO KNOW YOUR TACTACAM

FREQUENTLY ASKED QUESTIONS

When storing your Tactacam, charge the battery so it's 75% or higher. Remove the
battery to eliminate the possibility of internal corrosion. Replace the back cap to protect
against dust and other unwanted substances.
The removable battery in the camera is replaceable if it fails. See Battery
troubleshooting and other powering issues.
Do not dry the camera or battery with an external heat source such as a microwave,
oven, or hair dryer. Damage to the camera or battery caused by contact with liquid
inside the camera is not covered under the warranty.
Do not make any unauthorized alterations to the camera. Doing so may compromise
safety, regulatory compliance, performance, and will void the warranty.
MY TACTACAM WON'T RESPOND WHEN I PRESS A BUTTON
Press and hold the Rec/Power button for about 5 seconds until your camera
powers off. This reset saves all of your content. If that doesn't work, open the
bottom cap and remove the battery for 5 seconds.
MY TACTACAM WON'T POWER ON
Make sure your Tactacam Spotter LR is charged. To charge your camera, use the
included USB C cable and a computer or wall charger.
HOW DO I GET MY VIDEOS OFF MY TACTACAM?
You have a few different options. 1. You can plug the camera directly into your computer
using the USB C included in your package, be sure you hit the power button once the
camera is connected to make it readable by your computer. 2. You can use the micro
SD Card adapter, by placing the micro SD Card from your camera into the adaptor and
plug that directly into your computer. 3. You can connect directly to a smartphone or
tablet via the camera's Wi-Fi capability and the videos can be pulled directly from the
Tactacam Spotter LR.
(844) 482-2822