Maximizing Battery Life; Battery Storage And Handling - Tactacam SPOTTER LR Instruction Manual

DOWNLOADING THE TACTACAM APP
CAMERA BATTERY
Your camera and battery need to stay connected when operating.
DO NOT remove the battery from the camera when in use or your data will be lost.
On your Tactacam Spotter LR the battery indicator is located on the top right of the display
screen. When all 4 bars are illuminated the camera battery is full. As the battery levels
decreases the bars will begin to reduce in numbers till there is one bar light remaining. The
last battery level will begin to blink when the battery drops below 10%. If the battery reaches
0% while recording, the camera saves the file and powers off.

MAXIMIZING BATTERY LIFE

Extreme cold temperatures can decrease battery life. To maximize battery life in cold
conditions, keep camera in a warm place prior to use. Protect the Rec/Power Button to
prevent the camera from accidentally turning on.
CHARGING TIME USB CORD WALL PLUG
The battery charges to 80% in approximately two hours and 100% in approximately three
hours when using Tactacam's USB C compatible charger, Wall Charger for Tactacam, or
other USB C charging adapter. Other chargers might charge at a slower rate.
WARNING: Using a wall charging block other than a Tactacam's Wall Charging block
can damage the Tactacam's battery and could result in fire or leakage. Only use chargers
marked: Output 5V 1A. If you do not know the voltage and current of your charger, use
the included USB C cable to charge the camera from your computer.

BATTERY STORAGE AND HANDLING

The camera contains sensitive components, including the battery. Avoid exposing your
camera to extreme temperatures. Low or high temperature conditions may temporarily
shorten the battery life and cause the camera to temporarily stop working properly. Avoid
dramatic change in temperature or humidity when using the camera, as condensation
may form on/or within the camera.
WWW.TACTACAM.COM