Page 1
1694315 1694481 1694482 1694483 1694484 1694485 1694504 Lift Lever Kit Mfg. No. 1694561 For Baron / 2400 / RD Series PIN, Round Head, Drilled, 3/8 x 1 BRACKET, Mounting CLIP, Hair Pin CAPSCREW, Hex,5/16-18 x 1-3/4 PAD, Rubber SUPPORT PLATE...
Page 2
Installation Instructions Figure 2. Capscrew Removal A. Nuts, 5/16-18 C. Right Rear Seat Deck B. Capscrews, 5/16-18 x 3/4 D. Frame Figure 3. Bracket installation A. Nuts, 5/16-18 (Existing) C. RIght Rear Seat Deck B. Capscrews, D. Frame 5/16-18 x 1-3/4 (New) E.
Page 3
Lift Lever Kit Install New Lift Shaft Assembly BARON 2007 AND NEWER MODELS 1. Slide Lift Shaft Assy (A, Figure 7) into key-slotted hole (existing - attached to frame (B)) aligning key in Lift Shaft Assy (A) with key slot in hole (B). 2 Rotate the Lift Shaft Assy (C) 180 degree to the right to secure the Lift Shaft Assy in place.
Page 4
Installation Instructions Install Support Assembly 1. Hang support plate (A, Figure 10) onto shaft assem- bly (B). 2. The post on the support plate (A) fits between the clamp support (C) and hitch assembly (D). See Sub- Frame Hitch Installation Instructions for details on installing sub frame.