Table of Contents
Advertisement
APPENDI X
A
SIDEKICK PRO ICD CONNECTIONS TO PCB
Connecting the Sidekick Pro™ ICD pump to the Hawkeye system is done via CANBUS PCB located behind the
node enclosure on the right-hand side of the machine.
For machines that do not already have injection pumps, Raven cables P/N 115-0172-443 and P/N 115-0172-444 are
required. For systems that have Raven CAN Sidekick™ Pro pumps installed, simply follow the instructions below.
For systems with AGCONTROL, Sidekick Pro™ ICD pumps are installed and cables are connected.
1. Locate the PCB located on the above the axle on right-hand side of the machine.
FIGURE 1. Rear PCB Location
2. Remove the cover plate.
016-0171-655 Rev. E
S IDEKICK PRO™ ICD
A P P E N D I X A
INSTALLATION
43
Advertisement
Table of Contents
