Important Safety Process And Critical Functional Process; Essential Adhesives - Kubota K008-3 Workshop Manual

K008-3, U10-3
C. IMPORTANT SAFETY PROCESS AND CRITICAL FUNCTIONAL PROCESS
The following instructions are related to essential adhesives, important safety process
tional process . Pay special attention in servicing these process. (Pay also close attention in reconnecting
A
the electrical cables.)
a. Essential Adhesives
Type of screw adhesive
• Unless otherwise specified, use Three-Bond 1324 adhesive (medium-duty type).
Keep the screw threads free of oil and water.
Type of instantaneous adhesive
• Use Three-Bond 1733 or Three-Bond 1741E adhesive.
Keep the bond areas free of oil and water.
b. Important Safety Process
1. Reconnecting the fuel hose (clearance, hose routes, clamps, etc.)
2. Electrical cabling (engine, instrument panal, controls, etc.) (wiring routes, clamps and couplers)
c. Important Critical Functional Process
1. Setting up the travel wheel motor (tightening torque)
2. Reassembling the rotary joints (joint direction and shaft set-up)
3. Installing the swivel base bearing and the swivel motor (tightening torque)
4. Fitting the pump couplings (tightening torque)
5. Installing the counter weight.
S
A
I-S-6-1
1
I. GENERAL
and critical func-
S