Connecting Hose - Hitachi ZW 100-G Workshop Manual

Connecting Hose

CAUTION: When replacing the hoses, use
only genuine Hitachi service parts. Using
hoses other than genuine Hitachi hoses may
cause oil leaks, hose rupture or separation of
fitting, possibly resulting in a fire on the
machine. Do not install hoses kinked.
Application of high oil pressure, vibration, or
an impact to a kinked hose may result in oil
leaks, hose rupture or separation of fitting.
Utilize the print marks on hoses when
installing in order to prevent hose from being
kinked. Take necessary measures to protect
hoses from rubbing against each other. If the
hoses rub against each other, wear to the
hoses may result and lead to hose rupture.
Take care so that the hoses do not come into
contact with the moving parts or sharp
objects.
GENERAL / Tightening
a - Rubbing Against Each Other
a - Rubbing Against Each Other
a - Rubbing Against Each Other
W1-2-8
Incorrect
Incorrect
a
Incorrect
b b
a
Incorrect
a
Correct
W105-01-01-011
Correct
W105-01-01-012
Correct
W105-01-01-013
b - Clamp
Correct
b
b - Clamp
W105-01-01-014