Advertisement
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
The lamp is rated at IP65 for external use.
WHAT'S INCLUDED
•
Lamp assembly.
•
User manual.
INSTALLATION
•
Installation is simply embedding the spike in the ground then fit the lamp assembly
to the top, ensuring the solar panel is exposed for maximum charging efficiency
but not in the vicinity of other artificial light source or the low light illumination may
not function.
OPERATION
•
Allow at least 8hrs for the battery to fully charge initially.
NOTE: the lamp does not light except in low ambient light levels.
•
Remove the lamp from the spike, and rotate and remove the lens.
•
Remove the battery insulating strip then refit the lens and replace the lamp onto
the spike.
•
When the ambient light falls below a preset level the LEDs will illuminate
constantly.
Solar Garden Light
Model: PEL01355
1
Advertisement
Table of Contents
Related Manuals for Pro-Elec PEL01355
Summary of Contents for Pro-Elec PEL01355
- Page 1 Solar Garden Light Model: PEL01355 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • The lamp is rated at IP65 for external use. WHAT’S INCLUDED •...
- Page 2 CLEANING & MAINTENANCE • Clean the unit only with a damp cloth. Do not use any chemicals, abrasives or solvents that could damage the casing or lens. • During periods where the lamp may not be used, it is advisable to charge the battery occasionally to maintain it’s performance and before re-using the lamp.
Need help?
Do you have a question about the PEL01355 and is the answer not in the manual?
Questions and answers