Advertisement
Quick Links
Please read these instructions carefully before use and retain for future reference.
IMPORTANT SAFETY INFORMATION
•
Avoid locations of high temperature or humidity.
•
If the light output becomes less bright or flashes, replace the batteries.
•
Always remove the batteries if the light is not to be used for long periods.
•
Never mix new and old batteries or mix different battery types.
INSTALLATION
•
Slide the shield down the body and unscrew the lens unit from the main body and
insert the batteries into the holder noting the correct polarity.
•
The light will illuminate initially for 30 seconds before resuming it's motion detection in
low light normal function.
•
Replace the lens unit and turn clockwise to lock into place.
•
Refit the shield.
6 LED MOTION SENSOR LIGHT
PELL0012
Advertisement
Related Manuals for Pro-Elec PELL0012
Summary of Contents for Pro-Elec PELL0012
- Page 1 6 LED MOTION SENSOR LIGHT PELL0012 Please read these instructions carefully before use and retain for future reference. IMPORTANT SAFETY INFORMATION • Avoid locations of high temperature or humidity. • If the light output becomes less bright or flashes, replace the batteries.
- Page 2 • Drill 2 holes the wall 55mm apart vertically in the required location with regard to any concealed wiring or pipework, use wall plugs if required and screw in two dome head screws leaving the heads 4mm proud of the surface. •...