Philips Viva HR7510 User Manual page 6

4 Use your food
processor
General Assembly
Before you use or assemble any of the accessories,
make sure that you assemble according to Fig. 2 to 8.
Turn the bowl clockwise until you hear a click to
1
fix it onto the motor unit.
2 Assemble the accessory or the accessory
equipped with the shaft to the bowl.
Put the ingredients in the bowl.
3
4 Put the lid on the bowl, and turn the lid clockwise
until you hear a click to fix it. Then put the pusher
into the feeding tube.
•
For the discs, put the ingredients into the
feeding tube with the pusher.
5
Connect the power plug to the power supply.
6
Check the advised ingredient quantity and
setting in Fig. 9. Turn the knob to the desired
speed setting.
7
After use, turn the knob to 0, and then unplug
the appliance.
Color matching speed guide
For perfect results every time, match the accessory
color to the same speed color near the knob area.
Use speed 1 to whip cream, beat eggs, make pastries
and bread doughs. Use speed 2 to chop onions,
mince meat, make smoothies and more (Refer to
Fig.9 for details).
Color Optimized speed
Light orange Speed 1
Deep orange Speed 2
Blade unit (Speed 2)
Before you start, make sure that you assemble
according to Fig. 2.
You can use the blade unit to chop, mix, mince,
crumble or puree ingredients.
EN
10
To remove food that sticks to the blade or to the
inside of the bowl, use a spatula to remove the excess
after you switch off the appliance.
Usage/Application Purpose
Mincing meat/fish Meat balls, fish cake, burger
Chopping onion/
Salsa, pesto or for garnishing
herb
Crumbing nuts or Toppings or garnishing for
chocolates salads, bread, puddings
Almond or peanut butter
Pureeing nuts
paste
Mashing potatoes Make potato mesh
Mixing and beating Mixing cake batters
Note
•
Always put the blade unit in the bowl before you start
to add the ingredients.
•
Do not use the blade unit to chop hard ingredients, like
coffee beans, turmeric, nutmeg, and ice cubes, as this
may cause the blade to get blunt.
•
Do not let the appliance run too long when you
chop (hard) cheese or chocolate. Otherwise these
ingredients become too hot, start to melt, and turn
lumpy.
Kneading accessory (Speed 1)
Before you start, make sure that you assemble
according to Fig. 3.
Turn the knob to speed 1 to start. Turn the knob to
speed 0 to stop when the dough is formed.
You can use the kneading accessory for a quick and
fuss-free kneading of your dough for breads, rolls,
pastries, cookies, pies, and pasta.
Caution
•
Re-knead by hand only. Re-kneading in the bowl is not
recommended as it may make the processor unstable.
•
Do not put more than 500 gram flour at a time as it
may make the processor unstable.