Philips Viva HR7510 User Manual page 4

• If the blades get stuck, unplug
the appliance before you
remove the ingredients that
block the blades.
• Let hot ingredients cool down
(<60°C) before processing
them.
• Be careful if hot liquid is
poured into the food processor
or blender as it can be ejected
out of the appliance due to a
sudden steaming.
• This appliance is intended for
household use only.
Caution
• In order to avoid a hazard due
to inadvertent resetting of the
thermal cut-out, this appliance
must not be supplied through
an external switching device,
such as a timer, or connected
to a circuit that is regularly
switched on and off by the
utility.
• Never switch off the appliance
by turning the blender jar, the
bowl or its lid. Always switch
off the appliance by turning
the speed selector to 0.
• Unplug the appliance
immediately after use.
• Always wait until the moving
parts stop running, then switch
off and unplug the appliance
EN
8
before opening the lid and
reaching into any of the parts
that move in use.
• Always switch off and unplug
the appliance if it is left
unattended, and before
assembling, disassembling,
cleaning and changing
accessories, or approaching
parts that move in use.
• Thoroughly clean the parts
that come into contact with
food before you use the
appliance for the first time.
Refer to the instructions and
table for cleaning given in this
manual.
• Never use any accessories or
parts from other manufacturers
that Philips does not
specifically recommend. If
you use such accessories or
parts, your guarantee becomes
invalid.
• Do not exceed the maximum
level indication on the bowl or
the jar. Follow the quantities,
processing time and speed as
indicated in the user manual.
• Always let the appliance cool
down to room temperature
after each batch that you
process.