• Can be used 1 channel DMX mode, with CCT-preset of your choice. • Prepared for wireless DMX: just plug-in an optional WTR-DMX DONGLE ! (Briteq® code: 4645) • Flicker free TV-recordings thanks to adjustable LED refresh rate: 600 Hz to 4800 Hz! •...
• Due to safety reasons it is prohibited to make unauthorized modifications to the unit. Important: Never look directly into the light source! Don’t use the effect in the presence of persons suffering from epilepsy. BRITEQ 2/12 BT-THEATRE 200TW ®...
Page 5
No extra settings to be made in the setup menu, just follow the procedure in the user ® manual supplied with the WTR-DMX DONGLE from BRITEQ . The separate WTR-DMX DONGLE is available from WWW.BRITEQ-LIGHTING.COM (order code: 4645) 6.
Used to set the dimmer curve of the master dimmer. • Press the ▲/▼buttons until the desired function is showing on the display and confirm with [ENTER]. • Use ▲/▼ buttons to select the desired mode: BRITEQ 4/12 BT-THEATRE 200TW ®...
Page 7
ENGLISH OPERATION MANUAL • Press the [ENTER] button to save the setting. BRITEQ 5/12 BT-THEATRE 200TW ®...
Page 8
• Use ▲/▼ buttons to select the desired mode: • [AUTO]: the fan speed will be automatically adjusted to always have the best balance between fan noise and performance (light output). This is the best setting for use in theatres, conference rooms, … BRITEQ 6/12 BT-THEATRE 200TW ®...
Page 9
• Press the [ENTER] button: the display shows the firmware version. Note: The firmware of this unit can be upgraded using our special “Firmware Updater 2” (separately available from Briteq). More information about this can be found in the user manual of the firmware updater or our website: https://briteq-lighting.com/firmware-updater-2 CALIBRATION In this hidden menu, you can compensate the differences between the LEDs of different batches.
The DMX-controller send a WIRELESS DMX-signal to all units. • Mixed W-DMX: the first projector is equipped with an optional WTR-DMX DONGLE ! (Briteq code: 4645). The wireless DMX-signal sent to the first projector is also available on its DMX-output. All other DMX- equipment can be connected to the first projector using a standard DMX-cable.
Page 11
• The DMX-controller sends out a “discovery command”, all RDM devices respond and send their unique device ID. • The DMX-controller asks each RDM device for some basic data so it knows which devices are connected. The projector will respond: • Device name: BT-THEATRE 200TW • Manufacturer: ® Briteq • Category: LED Dimmer •...
Page 12
Since each unit has its own DMX-address, you can control them individually. Remember that each unit can use a different number of DMX-channels, depending on the DMX-mode you have selected in the menu. See the different DMX charts: BRITEQ 10/12 BT-THEATRE 200TW ®...
Page 14
ENGLISH OPERATION MANUAL The information might be modified without prior notice You can download the latest version of this user manual on our website: www.briteq-lighting.com BRITEQ 12/12 BT-THEATRE 200TW ®...