Haier HD90-A2979 User Manual page 21

Heat-pump-dryer
Hide thumbs Also See for HD90-A2979:
Table of Contents

Advertisement

Available languages

Available languages

EN
9.3 Empty the water tank
During operation, steam condenses to water which is
collected in the water tank. Empty the water tank after
each drying cycle.
1. Pull out the water tank from its housing (Fig. 9-9).
2. Empty the water tank (Fig. 9-10).
3. Reinstall the water tank to the tumble dryer (Fig.
9-11).
Notice
Do not use the water for any kind of drinking or food processing.
9.4 Tumble dryer
Wipe the outside of the tumble dryer and the control panel with a damp cloth. Do
not use any organic solvent or corrosive agent to avoid damage to the device.
9.5 Drum
After some operation time, fabric care agents or calcium contained in the water
can form an almost invisble fi lm on the inside of the drum. Use a damp cloth and
some detergent to remove it. Do not use any organic solvent or corrosive agent
to avoid damage to the device.
9.5 Evaporator
If the evaporator behind the condenser fi lter is dirty, it can be cleaned by use of
a vacuum cleaner. Make sure not to damage the evaporator while cleaning it.
9-Care and cleaning
Delay
T emp.
Wrinkle Free
Dry Level
Childl ock
i-Re fres h
Mix
Synthetics
T owel
Duvet
Wool
Warm Up
T imer
Delicate
Bulky
S hirt
Sp orts
Babycare
Quick Dry
Cotton
9-9
9-10
9-11
21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hd100-a2979Hd80-a3979Hd90-a3979Hd90-a3979sHd90-a3s979

Table of Contents