Freelap TX TOUCH PRO Instructions For Use

Freelap transmitter specially made for track and field starts

Download this manual

FURTHER INFORMATION

BATTERY AND BATTERY LIFE

Your Tx Touch Pro has a CR2032 Lithium battery, with a battery life of

15'000 starts, easily replaceable.

> Low battery indicator: When the battery becomes low, the LED of your

Tx Touch Pro turns red.

> Replace the battery: Unscrew the 2 screws on the back of the device

using a screwdriver, then remove the cover and the gasket. Remove the

used battery, and insert a new Lithium CR2032 battery. Put back the

gasket and cover, and screw back the 2 screws.

TECHNICAL SUPPORT

Our FAQ (Frequently Asked Questions), as well as other manuals and user

guides, can be found on our website at:

http://www.freelap.ch/support/

If you cannot ﬁnd the answers to your questions, please contact your

Freelap dealer. Find the list of Freelap dealers at:

http://www.freelap.ch/freelap-contact/

AFTER-SALES SERVICE & WARRANTY

Your TX Touch Pro is guaranteed 2 years. If you have any questions or if

you need assistance with your device, please contact your Freelap

dealer.

www.freelap.ch

Follow Freelap on

MADE BY FREELAP SA

Av. D.-Jeanrichard 2A

CH-2114 Fleurier – Switzerland

+41 32 861 52 42 - www.freelap.ch

TX TOUCH PRO

FREELAP TRANSMITTER SPECIALLY

MADE FOR TRACK AND FIELD STARTS

INSTRUCTION FOR USE

Page 1 > Replace the battery: Unscrew the 2 screws on the back of the device using a screwdriver, then remove the cover and the gasket. Remove the Your TX Touch Pro is guaranteed 2 years. If you have any questions or if used battery, and insert a new Lithium CR2032 battery. Put back the you need assistance with your device, please contact your Freelap gasket and cover, and screw back the 2 screws.
Page 2 ﬁnd all the information about how it works. PREREQUISITES the code "Finish" on your track. The Tx Touch Pro is a start transmitter. You must also have at least one OVERALL FUNCTIONING Your Tx Touch Pro transmitter is part of the Freelap system. In order to ﬁnish transmitter on your track (e.g.