9.2. Startup Procedure
To activate your FlatClient Panel PC connect the power supply to power connector on the FlatClient back side.
Alternative use the mating power connector for connecting your power cable. The LED "PWR" gives a green or blue
light now.
Don´t hesitate to ask for support:
e-mail:
Phone:
All essential drivers you´ll find on www.snt-embedded.de
9.3. RFID (Optional)
Figure 23: Screen with optional RFID function (red circle)
The RFID reader is recognized and addressed as a Virtual COM port.
A tag can be read e.g. with a command in the terminal:
050010\r
www.kontron.com
FlatClient ECO and FlatClient PRO, FlatClient RCK and FlatClient STS – User Guide Rev. 1.99
support@kontron.com
+49-821-4086-888
// 85